Work / Made to order
Cat Box Enclosure
A birch shell that hides the litter box and lifts straight off it. No hinges, no drawer, no bottom — grab the two handles on top, set the shell aside, and the pan is right there.
$500
Shipping included (US) · Built to order in 4–6 weeks
Buy — $500Secure checkout by Stripe. Questions first? info@chiduly.com
| Outside | 15″ W × 23″ D × 17″ H 18-3/16″ tall with the handles |
|---|---|
| Inside | 13-9/16″ × 21-9/16″ × 16-5/16″ |
| Entry | 8″ wide arch, sill 5-1/2″ off the floor |
| Material | Baltic birch plywood — 1/2″ walls, 3/4″ top Solid white oak slats |
| Hardware | Two Amerock Monument bar pulls Champagne bronze aluminum, 12-5/8″ centers |
| Finish | Rubio Monocoat Plant-based hardwax oil |
| Interior | Black |
| Weight | About 20 lb |
Lifts off to clean
The whole shell is the lid. Hands go straight down on the two pulls, ten inches apart, and it comes up level — no tipping, no reaching across.
Paw-safe slats
Nine white oak slats per side with quarter-inch gaps. That’s plenty of airflow, and narrower than a cat’s toe, so nothing gets caught.
Built to be sat on
A 3/4″ top with a shadow-line overhang and mitered corners, so the grain wraps the box. Most cats claim the top within a day.
Good to know: the enclosure is open at the bottom, so set it on a mat or boot tray to catch stray litter. Fits a pan up to roughly 13″ × 21″. Pan not included.
Need a different size?
Send the pan you use and where it’s going. A drawing comes back before anything is quoted.
Chi Duly Designs
Portland, Oregon